Royal-Distributing-2022-Winter

FREE SHIPPING ON ORDERS OVER $39 *

SUBSCRIBE TO OUR EMAILS FOR THE LATEST PRODUCTS AND DEALS!

ATS “BIG SHOT” STUD AND BACKER KIT FOR SINGLE PLY TRACKS

Special design for both the Ski-Doo Rev XP and Camoplast single ply tracks. Lower shoulder and tapered head to mount flush in track and eliminate idler wheel damage and vibration. Longer taper and 60° carbide tip for unbeatable penetration. Exclusive track gripping rings to prevent tear out. Longer threads to accommodate tall support nuts. Available in 1.075” for 1” tracks and 1.325” for 1.25” tracks. Kits sold with HUGE 1.600” “Bull Eye”™ backers and lightweight aluminum support nut. Unmatched durability and performance. 5/16” thread and 1-3/16”(1.375”) Head. LENGTH PART#

SNOW

APPAREL

INCLUDES WASHER & BIG NUT

1.075” 14-ATB-1075 1.325” 14-ATB-1325

HELMETS

EYEWEAR

ROYAL BREAKS DOWN ALL STUDS AND WASHERS. NO NEED TO BUY KITS. WE ONLY SELL YOU WHAT YOU NEED.

ATS “SHO GUN II” STAINLESS STEEL CARBIDE PUSH THROUGH FOR SINGLE & 2 PLY TRACKS Large 1” head - increased rigidity and holding strength to prevent studs from pulling through track. Stainless steel body, 5/16” shank for superior strength, reduced wear and rust resistant. Large silver brazed carbide insert greatly increases life of stud. Shoulderless design will work with Ski-Doo XP sleds, as well as the Camso Single Ply Tracks. Includes nyloc nut. Purchase stud & nut only or as a package with a round coloured nylon backing plate.

MX

APPAREL

PROTECTIVE GEAR

LENGTH PART# .875” 14-ATS-8750 1.00” 14-ATS-1000 1.075” 14-ATS-1075 1.325” 14-ATS-1325 1.450” 14-ATS-1450 1.520” 14-ATS-1520

YOU WON’T FIND A BETTER PACKAGE DEAL!

WEAR

CASUAL

NYLON ROUND BACKING PLATE

CAMERAS &

ALUMINUM DISCS WE RECOMMEND these washers for use with any stud. The premium washer available today. Machined high quality aluminum. Backside is counter-bored to insure a flat, snug fit on today’s thin tracks. 1-3/16” diameter, unequaled rigidity.

OVERSIZE ALUMINUM WASHER 14-WAS-140 1-3/8” Diameter x 1/4” Tall. 0.140 material thickness that works on any 5/16” stud. Anodized Premium heat-treated aluminum.

NYLON ROUND BACKING PLATE 1 1/4” round 5/16” hole. Made with 100% virgin nylon. Lightweight, durable (use for all traction applications). 1/2 the weight of aluminum.

COMMUNICATORS

ELECTRICAL

CLUTCH/DRIVE

TRACKS

SUSPENSION

WORK GREAT WITH ALL TYPES OF STUDS!

COLOUR PART # Black

CABLES

BRAKES

14-WAS-1601 14-WAS-1602 14-WAS-1603 14-WAS-1604

Blue Green Pink

DESCRIPTION 7mm / 1/4” hole

PART # 14-WAS-126 14-WAS-127 14-WAS-147

5/16” hole

Red 14-WAS-1605 Yellow 14-WAS-1606

5/16” hole OVERSIZED 1 3/8” dia

INTAKE/FUEL

WINDSHIELDS

IGRIP TRACK STUDS ST SERIES

TRACK CUTTER A MUST for installing all types of studs. Makes cutting track holes easy. Will install in any drill. Cuts a clean, neat hole and ejects the slugs automatically.

SKIS

STEERING

The iGrip ST studs are made from hot-dipped steel to maximize durability and ther- mally galvanized with a zinc coating which acts as a shield against corrosion. A tungsten carbide tip is welded to each stud to amplify continuous traction. This is possible thanks to the exceptional anchoring depth our studs achieve in ice.

Track lug thickness should be no less than 3/16” / 5mm.

ENGINE PARTS

PERFORMANCE

INSTALL TOOL INCLUDED!

DESCRIPTION PART # 7mm-1/4” Cutter 14-TC12 5/16” Cutter 14-TC13

SS SERIES The iGrip SS studs are made from hot-dipped steel to maximize durability and ther- mally galvanized with a zinc coating which acts as a shield against corrosion. A tungsten carbide tip is welded to each stud to amplify continuous traction. This is possible thanks to the exceptional anchoring depth our studs achieve in ice. The new shouldered stud is a must have for long lugged tracks. PART # LUG LENGTH QTY SERIES TRACK STUDS HEIGHT

CONTROL

TRACTION

LUGGAGE

ACCESSORIES

14-ST20150R 1”+ 20MM/.787” 150 ST 14-ST24150R 1.25”+ 24MM/.945” 150 ST 14-ST25150R 1.25”+ 25MM/.984” 150 ST 14-SS28150R 1.375”+ 28MM/1.102” 150 SS 14-SS32150R 1.5”+ 32MM/1.25” 150 SS 14-SS28200R 1.375”+ 28MM/1.102” 200 SS 14-SS28250R 1.375”+ 28MM/1.102” 250 SS 14-SS32200R 1.5”+ 32MM/1.25” 200 SS 14-SS32250R 1.5”+ 32MM/1.25” 250 SS TIRE STUDS 14-ST11150 .500”+ 11mm/.433” 150 SS 14-ST15150 .625”+ 15mm/.590” 150 SS 14-ST18150 .750”+ 18mm/.708” 150 SS 136” tracks and smaller 150 packs work, 137”-143” 200 pack, 144” + 250 pack.

TOOLS / TRAILER LUBRICANTS

ATV / UTV / MOTO

THIN NYLOC NUTS DESCRIPTION PART # 7mm hole 14-NYL-5000 5/16” hole (short nut) 14-NYL-5020 5/16” hole (tall nut) 14-NYL-5020-01

ST

SS

BICYCLE

REPLICAS

285

RETAIL STORES: GUELPH (519) 822-7081 INNISFIL (705) 431-9364 SUDBURY (705) 566-8111 WHITBY (905) 619-8000 OTTAWA-COMINGSOON!