Royal-Distributing-2022-Winter

MAIL ORDER: 1-800-265-2970 M-F 8AM-6PM EST EN/FR

SHOP ONLINE 24/7: WWW.ROYALDISTRIBUTING.COM

SNOW APPAREL STAINLESS STEEL® 60° SIGNATURE SERIES High corrosion resistance. Durable, sharp 60° carbide tip. 5/16” shank with 15/16” head. Includes locknuts.

MEGABITE® 60° Unique multi-directional stud has four flat sur- faces on shank. Provides enhanced acceleration and deceleration. Coated through hardened stud with 60° carbide tip.

CHISEL-TOOTH Great grass and ice drag racing stud. Flat vertical face traps ice and dirt. 5/16” steel shank and a 1” head. Includes locknuts. USED ON 2-PLY TRACKS ONLY. *1.325” and taller studs includes aluminum BIG NUTS!

15/16” head. Includes locknuts. USED ON 2-PLY TRACKS ONLY. *1.325”and taller studs now come with aluminum BIG NUTS! SIZE THREAD PART # 1.075” 5/16” 14-MEG-1075 1.175” 5/16” 14-MEG-1175 1.325” 5/16” 14-MEG-1325* 1.450” 5/16” 14-MEG-1450* 1.575” 5/16” 14-MEG-1575* 1.740” 5/16” 14-MEG-1740*

PROTECTIVE SIZE THREAD PART # 1.000” 5/16” 14-SSP-1005 1.075” 5/16” 14-SSP-1075 1.175” 5/16” 14-SSP-1175 1.325” 5/16” 14-SSP-1325* 1.450” 5/16” 14-SSP-1450* HELMETS USED ON 2-PLY TRACKS ONLY. *1.325”and 1.450” studs now come with aluminum BIG NUTS!

EYEWEAR

SIZE THREAD PART # 1.000” 7mm 14-CAP-1000 1.075” 5/16” 14-CAP-1075 1.205” 5/16” 14-CAP-1205 1.325” 5/16” 14-CAP-1325* 1.630 5/16” 14-CAP-1630* 1.860 5/16” 14-CAP-1860*

MX APPAREL

GEAR

CASUAL GOLD DIGGER® 60° Features an aggressive 60° point for maximum penetration. Heavy duty 5/16” through-hardened, threaded shank and 1” support head. Designed for violent accelera- tion on hard, icy conditions. Includes Locknuts. USED ON 2-PLY TRACKS ONLY. *1.325”and taller studs CAMERAS & COMMUNICATORS WEAR

GRAND MASTER® FOR SINGLE PLY TRACKS 60° carbide tip with a larger 1.200 head to pro- vide a larger anchor to distribute pressure over a wider area on the single ply track. 2.52 pitch tracks MUST use the SQUARE support plates. USED ON SINGLE-PLY TRACKS ONLY. *1.325”and up studs now come with aluminum BIG NUTS!

GRAND/TRIGGER STUDS THE lake ice stud – built to effortlessly penetrate icy terrain and provide ultimate traction with shortened threads and a lengthy, narrow, tapered profile. Through-hard- ened carbon steel with 60° carbide insert. Trigger studs have 15/16” head for use in two-ply tracks., Grand Trigger studs have 1.2” head for single-ply tracks. Both have anti-rotation lines. *All Trigger studs come with short BIG NUTS.

now come with aluminum BIG NUTS! # Silver in colour.

ELECTRICAL CLUTCH/DRIVE

SIZE THREAD PART # 0.875” 5/16” 14-GDP6-8755 0.920” 5/16” 14-GDP6-9205 # 1.000” 5/16” 14-GDP6-1005 1.075” 5/16” 14-GDP6-1075 1.175” 5/16” 14-GDP6-1175 1.325” 5/16” 14-GDP6-1325* 1.450” 5/16” 14-GDP6-1450* 1.575 5/16” 14-GDP6-1575*

SIZE THREAD TRIGGER PART #

GRAND TRIGGER PART #

SIZE THREAD PART # 1.075” 5/16” 14-GMP-1075 1.325” 5/16” 14-GMP-1325* 1.450” 5/16” 14-GMP-1450* 1.575” 5/16” 14-GMP-1575*

1.325" 5/16" 1.450" 5/16" 1.575" 5/16" 1.630" 5/16" 1.860" 5/16"

14-TRIG1325* 14-GTRG-1325* 14-TRIG1450* 14-GTRG-1450* 14-TRIG1575* 14-GTRG-1575*

TRACKS SUSPENSION

14-TRIG1630* 14-TRIG1860*

NOTE: Tunnel and/or Heat Exchanger Protection is required with all traction products. It is your responsibility to ensure proper clearances and adequate protection.

BRAKES

CABLES

ROYAL BREAKS DOWN ALL STUDS AND WASHERS. NO NEED TO BUY KITS. WE ONLY SELL YOU WHAT YOU NEED.

WINDSHIELDS

INTAKE/FUEL

SNOCROSS 60° 1.860” 1.860” with 60° carbide tip. 5/16” push through style. Meets ISR requirements.

ANGLED DIGGER PLATES Woody’s 5/16” aluminum, 7° angled support plates hold the stud off perpendicular from the track. Under load the stud moves to perpendicular enhancing the consistency of acceleration. USED ON 2-PLY TRACKS ONLY.

ENGINE PARTS GRAND MASTER WASHERS Woody’s 5/16” Aluminum round or square. Designed for the Grand Master studs. For SINGLE PLY TRACKS. 1.500” head on square plates, 1.600” on round. ROUND SUPPORT PLATES 14-AWA-3775 Woody’s 5/16” round aluminum support plate with a 1-3/8” diameter. USED ON 2-PLY TRACKS ONLY.

Through-hardened, alloy steel. USED ON 2-PLY TRACKS ONLY. *Now includes larger tall nut.

SKIS STEERING

7 ° angle

PERFORMANCE

TYPE PART # Single 14-ANG-3775 Double 14-ADA2-3775

TRACTION

CONTROL

TYPE PART # Round 14-ARG-3775* Square 14-ASG-3775 *Only for 2.86” pitch tracks.

SIZE THREAD PART # 1.860” 5/16”

14-RACE-1860 for 1.75” tracks

LUGGAGE ACCESSORIES

TOOLS / TRAILER GRAND DIGGERS 14-ADG-3775 LUBRICANTS

DOUBLE DIGGERS 14-ADD-3775

SQUARE BACKERS 14-ASW2-3775 5/16” square aluminum support plate with a 1.2” diameter. USED ON 2-PLY TRACKS ONLY.

ALUMINUM BIG NUT 5/16” - 24 threads. Nyloc.

ATV / UTV / Used with the Grand Master stud in SINGLE PLY TRACKS. This addition of a dual configuration gives you more studding options in the middle belt. For 2.86” pitch tracks.

Less weight than steel or 2 single aluminum plates. Dome area increased to take advantage of the patented dished head design Traction Master series studs. 5/16” holes. For 2-Ply tracks.

MOTO

SIZE PART # 1.575” Studs & Longer 14-ALN-7000 1.325-1.450” Studs 14-ALN-4500

REPLICAS

BICYCLE

*Some conditions may apply. Prices andmisprints subject to change. COVID-19 has caused supply issues and price fluctuations fromour suppliers. As a result prices are not shown for some items. See our website or call for assistance.

284

FOLLOW US!

GIVE THE GIFT OF CHOICE!

GIFT CARD$