2020 Fall/Winter Catalogue

C A N A D A ’ S P O W E R S P O R T S L E A D E R !

ATS “BIG SHOT” STUD AND BACKER KIT FOR SINGLE PLY TRACKS

SNOW APPAREL

Special design for both the Ski-Doo Rev XP and Camoplast single ply tracks. Lower shoulder and tapered head to mount flush in track and eliminate idler wheel damage and vibration. Longer taper and 60° carbide tip for unbeatable penetration. Exclusive track gripping rings to prevent tear out. Longer threads to accommodate tall support nuts. Available in 1.075” for 1” tracks and 1.325” for 1.25” tracks. Kits sold with HUGE 1.600” “Bull Eye”™ backers and lightweight aluminum support nut. Unmatched durability and performance. 1-3/16”(1.375”) Head. LENGTH PART# PRICE 1.075” 14-ATB-1075 2.69 1.325” 14-ATB-1325 2.79 INCLUDES WASHER & BIG NUT

EYEWEAR

HELMETS

MX APPAREL

ATS “SHO GUN II” STAINLESS STEEL CARBIDE PUSH THROUGH FOR SINGLE & 2 PLY TRACKS Large 1” head - increased rigidity and holding strength to prevent studs from pulling through track. Stainless steel body, 5/16” shank for superior strength, reduced wear and rust resistant. Large silver brazed carbide insert greatly increases life of stud. Shoulderless design will work with Ski-Doo XP sleds, as well as the Camso Single Ply Tracks. Includes nyloc nut. Purchase stud & nut only or as a package with a round coloured nylon backing plate.

SKIS STEERING WINDSHIELDS TRACKS SUSPENSION INTAKE FUEL BRAKES CABLES CLUTCH DRIVE ELECTRICAL CASUAL WEAR CAMERAS & COMMUNICATORS T

LENGTH PART# PRICE PKG DEAL .875” 14-ATS-8750 1.69 ea 1.99 ea 1.00” 14-ATS-1000 1.69 ea 1.99 ea 1.075” 14-ATS-1075 1.69 ea 1.99 ea 1.325” 14-ATS-1325 1.69 ea 1.99 ea 1.450” 14-ATS-1450 1.69 ea 2.19 ea 1.520” 14-ATS-1520 1.69 ea 2.29 ea

YOU WON’T FIND A BETTER PACKAGE DEAL!

NYLON ROUND BACKING PLATE

ALUMINUM DISCS WE RECOMMEND these washers for use with any stud. The premium washer available today. Machined high quality aluminum. Backside is counter-bored to insure a flat, snug fit on today’s thin tracks. 1-3/16” diameter, unequaled rigidity.

OVERSIZE ALUMINUM WASHER 14-WAS-140 $0.64 EA 1-3/8” Diameter x 1/4” Tall. 0.140 material thickness that works on any 5/16” stud. Anodized Premium heat-treated aluminum.

NYLON ROUND BACKING PLATE 1 1/4” round 5/16” hole. Made with 100% virgin nylon. Lightweight, durable (use for all traction applications). 1/2 the weight of aluminum.

COLOUR PART # Black ONLY $0.69 EA

WORK GREAT WITH ALL TYPES OF STUDS! ONLY $0.59 EA

14-WAS-1601 14-WAS-1602 14-WAS-1603 14-WAS-1604

Blue Green Pink

14-WAS-147 $0.64 EA

DESCRIPTION 7mm / 1/4” hole

PART # 14-WAS-126 14-WAS-127 14-WAS-147

Red 14-WAS-1605 Yellow 14-WAS-1606

5/16” hole

5/16” hole OVERSIZED 1 3/8” dia

IGRIP TRACK STUDS ST SERIES

TRACK CUTTER A MUST for installing all types of studs. Makes cutting track holes easy. Will install in any drill. Cuts a clean, neat hole and ejects the slugs automatically.

Track lug thickness should be no less than 3/16” / 5mm.

The iGrip ST studs are made from hot-dipped steel to maximize durability and ther- mally galvanized with a zinc coating which acts as a shield against corrosion. A tungsten carbide tip is welded to each stud to amplify continuous traction. This is possible thanks to the exceptional anchoring depth our studs achieve in ice.

INSTALL TOOL INCLUDED!

PERFORMANCE

DESCRIPTION PART # PRICE 7mm-1/4” Cutter 14-TC12 12.99 5/16” Cutter 14-TC13 13.99

ENGINE PARTS

SS SERIES The iGrip SS studs are made from hot-dipped steel to maximize durability and ther- mally galvanized with a zinc coating which acts as a shield against corrosion. A tungsten carbide tip is welded to each stud to amplify continuous traction. This is possible thanks to the exceptional anchoring depth our studs achieve in ice. The new shouldered stud is a must have for long lugged tracks.

TRACTION

CONTROL

LUGGAGE ACCESSORIES

PART # LUG LENGTH

QTY SERIES PRICE

ATV/MOTO TOOLS/TRAILER LUBRICANTS TRACK STUDS HEIGHT 14-ST20150R 1”+ 20MM/.787” 150 ST 189.00 14-ST24150R 1.25”+ 24MM/.945” 150 ST 209.00 14-SS28150R 1.375”+ 28MM/1.102” 150 SS 199.99 14-SS32150R 1.5”+ 32MM/1.25” 150 SS 209.99 14-SS28200R 1.375”+ 28MM/1.102” 200 SS 242.99 14-SS28250R 1.375”+ 28MM/1.102” 250 SS 299.99 14-SS32200R 1.5”+ 32MM/1.25” 200 SS 252.99 14-SS32250R 1.5”+ 32MM/1.25” 250 SS 314.99

THIN NYLOC NUTS

DESCRIPTION PART # PRICE 7mm hole 14-NYL-5000 0.20 ea 5/16” hole (short nut) 14-NYL-5020 0.19 ea 5/16” hole (tall nut) 14-NYL-5020-01 0.19 ea

ST

SS

136” And smaller 150 packs work, 137”-143” 200 pack, 144” + 250 pack.

266

*Some conditionsmayapply.Please see ourPoliciesandProcedures onpage 390 fordetails.Part#’s ingreenarenew this year.Pricesandmisprints subject to change.