2020 Fall/Winter Catalogue

NOTE: Tunnel and/or Heat Exchanger Protection is required with all traction products. It is your responsibility to ensure proper clearances and adequate protection. STAINLESS STEEL® 60° SIGNATURE SERIES

MEGABITE® 60° Unique multi-directional stud has four flat sur- faces on shank. Provides enhanced acceleration and deceleration. Coated through hardened stud with 60° carbide tip.

CHISEL-TOOTH Great grass and ice drag racing stud. Flat vertical face traps ice and dirt. 5/16” steel shank and a 1” head. Includes locknuts. USED ON 2-PLY TRACKS ONLY. *1.325” and taller studs includes aluminum BIG NUTS!

SNOW

APPAREL

High corrosion resistance. Durable, sharp 60° carbide tip. 5/16” shank with 15/16” head. Includes locknuts.

15/16” head. Includes locknuts. USED ON 2-PLY TRACKS ONLY. *1.325”and taller studs now come with aluminum BIG NUTS!

USED ON 2-PLY TRACKS ONLY. *1.325”and 1.450” studs now come with aluminum BIG NUTS!

HELMETS

EYEWEAR

MX

APPAREL

SIZE THREAD PART # PRICE 1.075” 5/16” 14-MEG-1075 2.34 1.175” 5/16” 14-MEG-1175 2.34 1.325” 5/16” 14-MEG-1325 * 2.34 1.450” 5/16” 14-MEG-1450 * 2.46 1.575” 5/16” 14-MEG-1575 * 2.69 1.740” 5/16” 14-MEG-1740 * 2.69 GRAND MASTER® FOR SINGLE PLY TRACKS 60° carbide tip with a larger 1.200 head to pro- vide a larger anchor to distribute pressure over a wider area on the single ply track. 2.52 pitch tracks MUST use the SQUARE support plates.

SIZE THREAD PART # PRICE 1.000” 7mm 14-CAP-1000 2.79 1.075” 5/16” 14-CAP-1075 3.49 1.205” 5/16” 14-CAP-1205 3.49 1.325” 5/16” 14-CAP-1325 * 3.49 1.630 5/16” 14-CAP-1630 * 3.69 1.860 5/16” 14-CAP-1860 * 3.69 SNOCROSS 60° 1.860” 1.860” with 60° carbide tip. 5/16” push through style. Meets ISR requirements.

GOLD DIGGER® 60° Features an aggressive 60° point for maximum penetration. Heavy duty 5/16” through-hardened, threaded shank and 1” support head. Designed for violent accelera- tion on hard, icy conditions. Includes Locknuts. USED ON 2-PLY TRACKS ONLY. *1.325”and taller studs SIZE THREAD PART # PRICE 1.000” 5/16” 14-SSP-1005 2.19 1.075” 5/16” 14-SSP-1075 2.29 1.175” 5/16” 14-SSP-1175 2.39 1.325” 5/16” 14-SSP-1325 * 2.39 1.450” 5/16” 14-SSP-1450 * 2.49

CLUTCH DRIVE ELECTRICAL CASUAL WEAR CAMERAS & T

COMMUNICATORS

Through-hardened, alloy steel. USED ON 2-PLY TRACKS ONLY. *Now includes larger tall nut.

USED ON SINGLE TRACKS ONLY. *1.325”and up studs now come with aluminum BIG NUTS!

now come with aluminum BIG NUTS! # Silver in colour.

SKIS STEERING WINDSHIELDS TRACKS SUSPENSION INTAKE FUEL BRAKES CABLES

SIZE THREAD PART # PRICE 0.875” 5/16” 14-GDP6-8755 2.59 0.920” 5/16” 14-GDP6-9205 # 2.59 1.000” 5/16” 14-GDP6-1005 2.59 1.075” 5/16” 14-GDP6-1075 2.59 1.175” 5/16” 14-GDP6-1175 2.59 1.325” 5/16” 14-GDP6-1325 * 2.89 1.450” 5/16” 14-GDP6-1450 * 2.89 1.575 5/16” 14-GDP6-1575 * 2.99 ROUND SUPPORT PLATES 14-AWA-3775 $0.74 EA Woody’s 5/16” round aluminum support plate with a 1-3/8” diameter. USED ON 2-PLY TRACKS ONLY. GRAND MASTER WASHERS Woody’s 5/16” Aluminum round or square. Designed for the Grand Master studs. For SINGLE PLY TRACKS. 1.500” head on square plates, 1.600” on round.

ONLY $3.69

SIZE THREAD PART # 1.860” 5/16”

SIZE THREAD PART # PRICE 1.075” 5/16” 14-GMP-1075 2.79 1.325” 5/16” 14-GMP-1325 * 2.99 1.450” 5/16” 14-GMP-1450 * 3.19 1.575” 5/16” 14-GMP-1575 * 3.19 COMBO DIGGER Woody’s 5/16” round aluminum support plates. Washer and nut affixed together for easy and quick installation. Only for 1.325” and taller studs. 14-AWC-3775 $1.49 EA 2-PLY TRACKS

14-RACE-1860 for 1.75” tracks

ANGLED DIGGER PLATES Woody’s 5/16” aluminum, 7° angled support plates hold the stud off perpendicular from the track. Under load the stud moves to perpendicular enhancing the consistency of acceleration. USED ON 2-PLY TRACKS ONLY.

7 ° angle

14-ARGC-3775 $1.99 EA SINGLE PLY TRACKS

ENGINE PARTS

PERFORMANCE

TYPE PART # PRICE Single 14-ANG-3775 1.24 ea Double 14-ADA2-3775 2.39 ea

TYPE PART # Round 14-ARG-3775 * Square 14-ASG-3775 ONLY $0.87 EA *Only for 2.86” pitch tracks.

CONTROL

TRACTION

GRAND DIGGERS 14-ADG-3775 $2.29 EA Used with the Grand Master stud in SINGLE PLY TRACKS. This addition of a dual configuration gives you more studding options in the middle belt. For 2.86” pitch tracks.

DOUBLE DIGGERS 14-ADD-3775 $1.59 EA Less weight than steel or 2 single aluminum plates. Dome area increased to take advantage of the patented dished head design Traction Master series studs. 5/16” holes. For 2-Ply tracks.

SQUARE BACKERS 14-ASW2-3775 $0.79 EA 5/16” square aluminum support plate with a 1.2” diameter. USED ON 2-PLY TRACKS ONLY.

ALUMINUM BIG NUT 5/16” - 24 threads. Nyloc.

LUGGAGE

ACCESSORIES

ATV/MOTO TOOLS/TRAILER LUBRICANTS

SIZE PART # PRICE 1.575” Studs & Longer 14-ALN-7000 0.74 ea 1.325-1.450” Studs 14-ALN-4500 0.59 ea

265