Section-00---002-003

FREE SHIPPING ON ORDERS OVER $45 *

SUBSCRIBE TO OUR EMAILS FOR THE LATEST PRODUCTS AND DEALS!

RAMP GRIPGLIDES 12-201101 For open-frame ramps on flatbed trailers Comes with 16 pieces, enough for one side of a ramp. 2 sets will complete both sides. Fits 1” square tubing. Includes 16 pieces.

EDGE GLIDES 12-202306 An innovative accessory that provides smooth Edge transition from the ground to your tilting trailer or ramp. Measures 5-7/8” x 8-3/4”. Includes 4 pieces and stainless steel screws. Not for enclosed trailers. Non-hinged design. NE W

TRAXMAT Prevents damage to trailer deck caused by studded tracks. Oversized 18”W x 3/8” thick for optimum protection. Bottom groove design dissipates moisture and prevents dry rot. Improves traction when loading snowmobiles. Mounting hardware included. Sold each.

RAMP GRIPGLIDES 12-200057 Excellent traction and braking control while loading or unloading. Gives su perior traction and protection from stud penetration. Wraps right around your 1” Bars on any ramp. 15” length protects ramp from all Track widths. 6 piece kit with stainless steel torque fasteners and driver.

SNOW

APPAREL

HELMETS

EYEWEAR

DESCRIPTION PART # Traxmat 54” 12-200981 Traxmat 72” 12-200982

ATV/MX

APPAREL

EDGE GLIDES 2.0 Innovative Edge Glide provides smoother Edge transition from the ground to your trailer or ramp. Increased size allowing for more versatility. Integrated traction knobs to provide grip for tires and foot traffic. Integrated cut lines to provide clear edges when trimming to fit. Hinge & pin design eliminates stainless hinge to reduce assembly time. Stainless steel hardware included.

EDGE GUARDS 12-13388 12pc KIT Maximum protection for loading your snowmobile! Innovative containment system providing additional safety for loading &

PROTECTIVE GEAR

unloading. New design combines our Flex Glide High & LowPro Grip Glide into one great product. Increased safety makes loading & unloading easier

DESCRIPTION PART # 2pc (48”) 12-13390 3pc (72”) 12-13391 4pc (96”) 12-13392

WEAR

CASUAL

for all ages. Protects trailer door cables from being caught by snowmobile skis. Interlocking design makes installation a breeze. Stainless steel hardware included.

MOTO RAMP PRO 12-200062

RAMP PRO 2.0 12-200060 11.5” LowPro GripGlide provides increased versatility to the most versatile ramp on the powersports market. 11.5” LowPro GripGlide accommodates snowmobile ski stances down to 30”. LowPro GripGlides provide the market’s safest walk when entering and exiting the vehicle or trailer. Includes

CAMERAS

Proven LowPro GripGlides provide a safe surface for loading in any condition. Tapered feet and fingers have molded rubber components to keep the ramp in a secure position. Retrax retractable strap included with ramp for additional safety and security. Integrated catcher-keeper makes for easy handling and transport. Product dimensions: OPEN – 13” x 93” x 1.75” : CLOSED – 13” x 47” x 5.5”. Product capacity: 600 lbs.

COMMUNICATORS

ELECTRICAL

CLUTCH/DRIVE

Caliber’s Retrax strap to easily secure the ramp to your vehicle. Measures at 90” long and 52” wide, for a safe, effective, and comfortable loading

TRACKS

angle. Fold down to 27” wide for easy storage. A safe and effective loading solution for most Snowmobiles, ATVs, UTVs, Snowbikes, Dirtbikes, Motorcycles, and Golf Carts 1500lb. rating Includes Caliber’s lifetime warranty.

SUSPENSION

NE W

RAMP PRO HD 12-200061 11.5” LowPro GripGlide accommodates snowmobile ski stanc es down to 30”. Additional Retrax accessory strap mounting locations allow users to secure the ramp’s outer portions when using to load full-size UTV’s (+50”). Removable center section, with inverted hinges, allows users to unbolt – re-bolt – and use the condensed ramp for Dirtbikes (28”). Includes (1) Retrax strap to easily secure the ramp to your vehicle. Measures 90” L x 52” W. 3,000lb. rating – outside portions rated at 1,250lb. ea. Grip Glides pictured on centre rungs are sold separately: 12-200057 (6 pieces).

SNOWMOBILE SKI CLAMP AC6500037 The snowmobile industry’s newest and most innovative snowmobile tie-down system. Industry’s first snowmobile clamp that can be installed and adjusted off the trailer or sled deck. Easily adapt pressure for different skis without disengaging with our on demand adjustment system. Enclosed mechanism for trusted

CABLES

BRAKES

INTAKE/FUEL

WINDSHIELDS

operation in all conditions. Extended ski pads allow for use with a wider variety of snowmobile ski stances. Proprietary engineer-grade Nylon blend for long-lasting durability. Ergonomic grab handles allow for easier placement and operation than competitive models. 46” long, 4.5” wide, 9 lbs. NOTE: Pre-production image, may differ cosmetically.

SKIS

STEERING

TRAILER/MOTO MATS Trailer mats to cover the floor of your trailer. Grooved, so that moisture escapes and doesn’t rot wood floors. Royal uses these on their race trailers - proven to be indestructible and easy to clean, just sweep and hose off. Great for many uses! Tile to fit any sized trailer. Screw kit not included. Heavy enough to use as a trailer floor without gluing or screws. We recom mend fastening with 1.25” screws. (See chart for stainless hardware) 48” wide mat is 3/4” thick. 16” wide mat is 1/2” thick. ALSO PERFECT FOR PUTTING ON THE GROUND AT THE TRACK. PUT YOUR MOTOSTAND ON IT TO SET UP A TIDY AREA TO CLEAN OR WORK ON YOUR BIKE AT THE TRACK!

TRAILER MATS Trailer mats to cover the floor of your trailer. Smaller sized, easy to handle 30” x 30” to line trailers , or 30” x 15” for Snowmobile track grip on open trailers. Raised bumps for traction when used with

ENGINE PARTS

PERFORMANCE

Snowmobiles, ATV’s or bikes. Cut and tile to fit any sized trailer. We recommend gluing to trailer floor using a PL type adhesive and securing with 3/4” or 1” screws. See chart for stainless hardware. 3/16” thick.

CONTROL

TRACTION

LUGGAGE

ACCESSORIES

TOOLS / TRAILER LUBRICANTS

STAINLESS HARDWARE FOR MATS PART# Washer Cupped No 8 - 100 pk W12-00401 3/4” Phillips No 8 - 100 pk W12-00463 1” Robertson No 8 - 100 pk W12-00459 1.25” Robertson No 8 100 pk W12-00460 DESCRIPTION

DESCRIPTION PART # 48” W x 72” L 12-34411* 16” W x 72” L 12-34407-03 *LOCAL PICKUP ONLY CANNOT BE SHIPPED

PART # DESCRIPTION 12-34418

(1) Traction Mat 30” x 30” (1) Traction Mat 15” x 30”

ATV / UTV MOTO

12-34419

321

RETAIL STORES: GUELPH (519) 822-7081 INNISFIL (705) 431-9364 SUDBURY (705) 566-8111 WHITBY (905) 619-8000 KANATA (613)663-3167