Section-00---002-003

MAIL ORDER: 1-800-265-2970 M-F 8AM-6PM EST EN/FR

SHOP ONLINE 24/7: WWW.ROYALDISTRIBUTING.COM

FREE SHIPPING ON ORDERS OVER $45 *

SUBSCRIBE TO OUR EMAILS FOR THE LATEST PRODUCTS AND DEALS!

SNOW APPAREL STAINLESS STEEL® 60° SIGNATURE SERIES High corrosion resistance. Durable, sharp 60° carbide tip. 5/16” shank with 15/16” head. Includes locknuts.

MEGABITE® 60° Unique multi-directional stud has four flat sur faces on shank. Provides enhanced acceleration and deceleration. Coated through hardened stud with 60° carbide tip.

CHISEL-TOOTH Great grass and ice drag racing stud. Flat vertical face traps ice and dirt. 5/16” steel shank and a 1” head. Includes locknuts. USED ON 2-PLY TRACKS ONLY. *1.325” and taller studs includes aluminum BIG NUTS!

SNOW

APPAREL

15/16” head. Includes locknuts. USED ON 2-PLY TRACKS ONLY. *1.325”and taller studs now come with aluminum BIG NUTS! SIZE THREAD PART # 1.075” 5/16” 14-MEG-1075 1.175” 5/16” 14-MEG-1175 1.325” 5/16” 14-MEG-1325* 1.450” 5/16” 14-MEG-1450* 1.575” 5/16” 14-MEG-1575* 1.740” 5/16” 14-MEG-1740*

HELMETS USED ON 2-PLY TRACKS ONLY. *1.325”and 1.450” studs now come with aluminum BIG NUTS!

EYEWEAR

HELMETS

EYEWEAR

SIZE THREAD PART # 1.000” 7mm 14-CAP-1000 1.075” 5/16” 14-CAP-1075 1.205” 5/16” 14-CAP-1205 1.325” 5/16” 14-CAP-1325* 1.630” 5/16” 14-CAP-1630* 1.860” 5/16” 14-CAP-1860*

SIZE THREAD PART # 1.000” 5/16” 14-SSP-1005 1.075” 5/16” 14-SSP-1075 1.175” 5/16” 14-SSP-1175 1.325” 5/16” 14-SSP-1325* 1.450” 5/16” 14-SSP-1450*

APPAREL

ATV/MX

ATV/MX

APPAREL

TRACK CUTTER A MUST for installing all types of studs. Makes cutting track holes easy. Will install in any drill. Cuts a clean, neat hole and ejects the slugs automatically.

THIN NYLOC NUTS DESCRIPTION PART # 7mm hole 14-NYL-5000 5/16” hole (short nut) 14-NYL-5020 5/16” hole (tall nut) 14-NYL-5020-01

ATS ALUMINUM WASHER 14-WAS-140 1-3/8” Diameter x 1/4” Tall. 0.140 material thickness that works on any 5/16” stud. Anodized Premium heat-treated aluminum.

PROTECTIVE

GEAR

CASUAL GOLD DIGGER® 60° Features an aggressive 60° point for maximum penetration. Heavy duty 5/16” through-hardened, threaded shank and 1” support head. Designed for violent accelera tion on hard, icy conditions. Includes Locknuts. USED ON 2-PLY TRACKS ONLY. *1.325”and taller studs

GRAND MASTER® FOR SINGLE PLY TRACKS 60° carbide tip with a larger 1.200 head to pro vide a larger anchor to distribute pressure over a wider area on the single ply track. 2.52 pitch tracks MUST use the SQUARE support plates. USED ON SINGLE-PLY TRACKS ONLY. *1.325”and up studs now come with aluminum BIG NUTS!

GRAND/TRIGGER STUDS THE lake ice stud – built to effortlessly penetrate icy terrain and provide ultimate traction with shortened threads and a lengthy, narrow, tapered profile. Through-hard ened carbon steel with 60° carbide insert. Trigger studs have 15/16” head for use in two-ply tracks., Grand Trigger studs have 1.2” head for single-ply tracks. Both have anti-rotation lines. *All Trigger studs come with short BIG NUTS.

PROTECTIVE GEAR

WEAR

WEAR

CASUAL

DESCRIPTION PART # 7mm-1/4” Cutter 14-TC12 5/16” Cutter 14-TC13

now come with aluminum BIG NUTS! # Silver in colour.

CAMERAS COMMUNICATORS

CAMERAS

SIZE THREAD PART # 0.875” 5/16” 14-GDP6-8755 0.920” 5/16” 14-GDP6-9205 # 1.000” 5/16” 14-GDP6-1005 1.075” 5/16” 14-GDP6-1075 1.175” 5/16” 14-GDP6-1175 1.325” 5/16” 14-GDP6-1325* 1.450” 5/16” 14-GDP6-1450* 1.575” 5/16” 14-GDP6-1575*

COMMUNICATORS

ELECTRICAL CLUTCH/DRIVE

ATS “SHO GUN II” STAINLESS STEEL CARBIDE STUD FOR SINGLE & 2 PLY TRACKS Large 1” head - increased rigidity and holding strength to prevent studs from pulling through track. Stainless steel body, 5/16” shank for superior strength, reduced wear and rust resistant. Large silver brazed carbide insert greatly increases life of stud. Shoulderless design will work with Ski-Doo XP sleds, as well as the Camso Single Ply Tracks. Includes nyloc nut. LENGTH PART#

ALUMINUM DISCS WE RECOMMEND these washers for use with any stud. The premium washer available today. Machined high quality aluminum. Backside is counter-bored to insure a flat, snug fit on today’s thin tracks. 1-3/16” diameter, unequaled rigidity.

SIZE THREAD TRIGGER PART #

GRAND TRIGGER PART #

SIZE THREAD PART # 1.075” 5/16” 14-GMP-1075 1.325” 5/16” 14-GMP-1325* 1.450” 5/16” 14-GMP-1450* 1.575” 5/16” 14-GMP-1575*

1.325" 5/16" 1.450" 5/16" 1.575" 5/16" 1.630" 5/16" 1.860" 5/16"

14-TRIG1325* 14-GTRG-1325* 14-TRIG1450* 14-GTRG-1450* 14-TRIG1575* 14-GTRG-1575*

ELECTRICAL

CLUTCH/DRIVE

14-TRIG1630* 14-TRIG1860*

TRACKS SUSPENSION

WORK GREAT WITH ALL TYPES OF STUDS!

NOTE: Tunnel and/or Heat Exchanger Protection is required with all traction products. It is your responsibility to ensure proper clearances and adequate protection.

TRACKS

SUSPENSION

.875” 14-ATS-8750 1.00” 14-ATS-1000 1.075” 14-ATS-1075 1.325” 14-ATS-1325 1.450” 14-ATS-1450 1.520” 14-ATS-1520

DESCRIPTION 7mm / 1/4” hole

PART # 14-WAS-126 14-WAS-127 14-WAS-147

BRAKES ROYAL BREAKS DOWN ALL STUDS AND WASHERS. NO NEED TO BUY KITS. WE ONLY SELL YOU WHAT YOU NEED. CABLES

5/16” hole

CABLES

BRAKES

5/16” hole OVERSIZED 1 3/8” dia

SNOCROSS 60° 1.860” 1.860” with 60° carbide tip. 5/16” push through style. Meets ISR requirements.

ANGLED DIGGER PLATES Woody’s 5/16” aluminum, 7° angled support plates hold the stud off perpendicular from the track. Under load the stud moves to perpendicular enhancing the consistency of acceleration. USED ON 2-PLY TRACKS ONLY.

ENGINE PARTS GRAND MASTER WASHERS Woody’s 5/16” Aluminum round or square. Designed for the Grand Master studs. For SINGLE PLY TRACKS. 1.500” head on square plates, 1.600” on round. INTAKE/FUEL ROUND SUPPORT PLATES 14-AWA-3775 Woody’s 5/16” round aluminum support plate with a 1-3/8” diameter. USED ON 2-PLY TRACKS ONLY.

WINDSHIELDS

Through-hardened, alloy steel. USED ON 2-PLY TRACKS ONLY. *Now includes larger tall nut.

IGRIP TRACK STUDS ST SERIES

INTAKE/FUEL

WINDSHIELDS

SKIS STEERING

7 ° angle

The iGrip ST studs are made from hot-dipped steel to maximize durability and thermally galva nized with a zinc coating which acts as a shield against corrosion. A tungsten carbide tip is welded to each stud to amplify continuous traction. This is possible thanks to the exceptional anchoring depth our studs achieve in ice. SS SERIES The iGrip SS studs are made from hot-dipped steel to maximize durability and thermally galva nized with a zinc coating which acts as a shield against corrosion. A tungsten carbide tip is welded to each stud to amplify continuous traction. This is possible thanks to the exceptional anchoring depth our studs achieve in ice. The new shouldered stud is a must have for long lugged tracks. PART # LUG LENGTH QTY SERIES TRACK STUDS HEIGHT 14-SS11200R .500”+ 11mm/.433” 200 SS 14-ST11200 .500”+ 11mm/.433” 200 ST

SKIS

STEERING

PERFORMANCE

TYPE PART # Single 14-ANG-3775 Double 14-ADA2-3775

TRACTION TYPE PART # Round 14-ARG-3775* Square 14-ASG-3775 *Only for 2.86” pitch tracks.

ENGINE PARTS

PERFORMANCE

SIZE THREAD PART # 1.860” 5/16”

CONTROL

For 136” tracks and smaller the 150 packs work. For 137”-143” tracks use the 200 pack. For 144”+ tracks use the 250 pack.

14-RACE-1860 for 1.75” tracks

CONTROL

TRACTION

14-ST20150R 1”+ 20MM/.787” 150 ST 14-ST24150R 1.25”+ 24MM/.945” 150 ST 14-ST24200R 1.25”+ 24MM/.945” 200 ST 14-ST25150R 1.25”+ 25MM/.984” 150 ST 14-ST25200R 1.25”+ 25MM/.984” 200 ST 14-SS28150R 1.375”+ 28MM/1.102” 150 SS 14-SS28200R 1.375”+ 28MM/1.102” 200 SS 14-SS28250R 1.375”+ 28MM/1.102” 250 SS 14-SS32150R 1.5”+ 32MM/1.25” 150 SS 14-SS32200R 1.5”+ 32MM/1.25” 200 SS 14-SS32250R 1.5”+ 32MM/1.25” 250 SS

ST

LUGGAGE ACCESSORIES

GRAND DIGGERS 14-ADG-3775

DOUBLE DIGGERS 14-ADD-3775

SQUARE BACKERS 14-ASW2-3775 5/16” square aluminum support plate with a 1.2” diameter. USED ON 2-PLY TRACKS ONLY.

ALUMINUM BIG NUT 5/16” - 24 threads. Nyloc.

SS

LUGGAGE

TOOLS / TRAILER Used with the Grand Master stud in SINGLE PLY TRACKS. This addition of a dual configuration gives you more studding options in the middle belt. LUBRICANTS

Less weight than steel or 2 single aluminum plates. Dome area increased to take advantage of the patented dished head design Traction Master series studs. 5/16” holes. For 2-Ply tracks.

ACCESSORIES

TOOLS / TRAILER LUBRICANTS

ST20/24 SS28/32 Track lug thickness should be no less than 3/16” / 5mm.

TIRE STUDS 14-ST11150 14-ST15150 14-ST18150

SIZE PART # 1.575” Studs & Longer 14-ALN-7000 1.325-1.450” Studs 14-ALN-4500

.500”+ 11mm/.433” 150 ST .625”+ 15mm/.590” 150 ST .750”+ 18mm/.708” 150 ST

ATV / UTV

ST

SS

MOTO

ATV / UTV MOTO

*Some conditions apply. Prices andmisprints are subject to change. Due to supply and price volatility fromour suppliers, prices are not shown for some items. See our website or call for assistance.

286

287

GIVE THE GIFT OF CHOICE!

FOLLOW US!

RETAIL STORES: GUELPH (519) 822-7081 INNISFIL (705) 431-9364 SUDBURY (705) 566-8111 WHITBY (905) 619-8000 KANATA (613)663-3167

GIFT CARD$