Section-00---002-003

MAIL ORDER: 1-800-265-2970 M-F 8AM-6PM EST EN/FR SKI-DOO FRONT SUSPENSION BRACE KITS SUSPENSION MODULE BRACE KIT 08-30066 ‘08-21 XP/XR/XS/XM MODELS 08-30067 ‘17-22 850 GEN 4 CHASSIS MODELS HELMETS

SHOP ONLINE 24/7: WWW.ROYALDISTRIBUTING.COM

FREE SHIPPING ON ORDERS OVER $45 *

SUBSCRIBE TO OUR EMAILS FOR THE LATEST PRODUCTS AND DEALS!

BEND/STYLE MX BENDS CR High bend

COLOUR PART# A B C D E F

MEASUREMENTS IN MM

SNOW APPAREL

Silver Silver

A08-7221 795 95 70 125 62 195 A08-7592 796 80 55 135 57 207 802 99 65 135 54 201 A08-9720 805 93 50 140 55 206 803 92 56 135 57 203 A08-7872 790 142 105 120 90 220 A08-6071 785 140 105 80 100 241 A08-7811 806 150 95 125 75 229 A08-7801 732 100 85 95 63 173 780 138 100 125 42 178 A08-9715 A08-9718 A08-9662 A08-9668

08-30066

RM 125/250, DRZ 400 bend

08-30067

RC bend

Silver/Gold Grey Blue/Silver Black Black

FOR REFERENCE ONLY. STYLE AND COLOR NOT AS SHOWN BELOW.

SNOW

7/8” HANDLEBARS Cross-brace engineered to extremely tight tolerances, with lightweight single-bolt clamping system. Exclusive aluminum alloy created to withstand the extremes of racing. Racer Bars are sized the same as what the racers use and are anodized. Shot-peened anodized corrosion-resistant finish; laser etched positioning grid.

APPAREL

Villopoto/Stewart bend Reed/Windham bend

EYEWEAR

ATV BENDS TRX 400 EX/450 R, LTZ/KFX/DVX 400

Attaches with rivets to make it easy to install. Doubles as a skidplate protecting the S Module. Made out of steel and is zinc plated. Works with any skidplate.

Black Silver Silver Silver

Racer Bar (Anodized)

HELMETS

EYEWEAR

Raptor 660 bend ATV/Snow Race Bar MINI BARS KX 80/85/100 ‘98-14 bend RC Mini/85cc bend

COMES WITH CROSSBAR PAD!

APPAREL

ATV/MX

Tanium Silver Black

A08-7844 A08-7843 A08-7845

UPPER A-ARM KIT 08-30046 ‘08-21 XP/XM/XS/XRS CHASSIS ONLY

PROTECTIVE CHASSIS SUPPORT BRACES These products saves belts, chassis, and increases hp. Easy 10 installation. There is no drilling, cutting, or modifying. Support brace mounts from clutch tower to front of frame. Pre-load brace to build tension to help with the chassis flex. Comes complete with mounting hardware and instructions. Built from lightweight aluminum.

ATV/MX

APPAREL

FATBARS 1-1/8” CLAMP AREA - REQUIRES FATBAR ADAPTORS (28.6 mm) tapered OD, profile wall, brace-less handlebar that combines excellent strength with good resilience. All Fatbars are anodized and have a laser-etched positioning grid.

Excluding 550 Fan, 600/900 Ace, and 1200 models. This kit will strength en the weak Upper A-Arm mounting points. The A-Arm mounting points can bend from impact before the A-Arms bend causing an expensive repair.

GEAR

PROTECTIVE GEAR

12-284143

CASUAL

12-384024

WEAR

MEASUREMENTS IN MM PADS NOT INCLUDED

WEAR

CASUAL

BEND/STYLE Reed/Windham bend

COLOUR PART# A B C D E F

Blue Black

A08-6031 A08-6027 A08-6040 A08-6041

803 92 56 100 57 187

CAMERAS COMMUNICATORS

RC, CR/CRF 04+, KX/KXF 06+ bend Tanium Black

802 99 65 105 54 188

KTM SX/F 125-450 bend

Black A08-6721 811 92 52 117 52 222 Tanium A08-6050 795 95 70 115 62 200

MORE BENDS & COLOURS ARE AVAILABLE. PLEASE CALL FOR DETAILS.

CR High bend

CAMERAS

TWINWALLS 1-1/8” CLAMP AREA - REQUIRES FATBAR ADAPTORS Oversized diameter 1-1/8” (28.6 mm) handlebar, which utilizes two tubes, one within the other, borrowing principles from aircraft design to give the best combination of lightness, strength and safety.

COMMUNICATORS

ELECTRICAL CLUTCH/DRIVE

MODEL

YEAR PART #

COMES WITH CROSSBAR PAD!

MEASUREMENTS IN MM

XP (w/Etec) /XS/XM Chassis ‘08-20 12-284143 Etec Gen 4/Lynx Radien Chassis '17-23 12-384024 Gen 5 Chassis '23-24 12-183241* *Not Shown

ELECTRICAL

BEND/STYLE McGrath/Short Villopoto/Stewart Reed/Windham RC High

BLACK TANIUM A B C D E F A08-01026 A08-01029 805 83 40 125 55 200 A08-01007 A08-01010 802 119 80 115 54 187 A08-01014 A08-01017 805 93 50 110 55 200 A08-01022 A08-01025 803 92 56 110 57 190

CLUTCH/DRIVE

TRACKS SUSPENSION

CHROMOLY HANDLEBARS 4130 Chromoly steel. Snowmobile specific bends offer better comfort. Fits 7/8” handlebar clamps. No rise flat design offers more surface area for controls. Accepts standard handlebar hooks. Black only.

SPI/SPX CARBON FIBER HANDLEBARS 08-118018 7075-T6 Aluminum wrapped in a thin skin of carbon fiber. Carbon fiber wrap acts an an insulation barrier between the grip heater and the alumi num, allowing grips to get hotter. Clamp surface is 1-1/8”, tapers down to 7/8”. 1-1/8” Oversize clamp kit required (SEE NEXT PAGE). 760mm wide, 10° pull back with race bend.

NE W

TRACKS

SUSPENSION

BRAKES

CABLES

FATPAD BAR PADS Made from a high-density foam to reduce rider injury and are covered by high-pressure resistant shiny plastic supercross covers. 7” long.(7” x 2-3/4” x 3-3/8”). COLOUR PART # Red A12-65200 Blue A12-65201 Black A12-65203

OVERSIZE BAR ADAPTOR A08-200900 Universal adaptor allows 1-1/8" bars to be clamped to ATVs, motorcycles and snowmobiles with or without PowerMadd Pivot Riser Blocks.

CABLES

BRAKES

Race

WINDSHIELDS

INTAKE/FUEL

INTAKE/FUEL

WINDSHIELDS

10°

DESCRIPTION PART # 10 ° bar 08-202108 Race bar 08-202110

Orange A12-65204 Yellow A12-65205

SKIS STEERING

SKIS

STEERING

ENGINE PARTS ACCEL ALUMINUM HANDLEBAR PERFORMANCE

CHEETAH FACTORY RACING HANDLEBARS All bars have QR (quick rise) technology. Made from 7075 heat-treated super aluminum with flex technology. 7075 aluminum dissipates bumpy conditions more effectively, keeping you fresh and riding longer. Strong, lightweight and built to last. Bar Pad not included. SEE NEXT PAGE FOR FATBAR ADAPTOR.

7/8” diameter & clamp area. Made from 2014 aluminum alloy tube with 6061-T6 alloy clamps and crossbar. Laser- etched positioning grid and logos. Knurled left end. Shot peened and anodized finish for increased fatigue life. Bar pad NOT included. Silver colour only. See diagram for measurements reference.

ENGINE PARTS

PERFORMANCE

CELLPHONE BARPAD 08-999100 Simple universal mounting application works with 7/8”, 1 and 1/8” handlebars, as well as both straight and rise handlebars. Encapsulates phone to protect it from the elements ideal for street and off-road conditions including, mud, snow and rain. Clear screen cover allows users to operate 2.82” x 0.31”. Optional heater kit keeps phone at operating temperature. Heater can also be used for any accessory bag. Use a combination of the Optimate Battery Lead and USB Cable to charge your device while you ride! touchphone while keeping it safe. Max phone dimensions: 5.78” x

BOONDOCKER 2.0 12-571442 FLAT BLACK

12-571443

TRACTION

CONTROL

BATTERY LEAD 01-2900 Premium quick-connect permanent battery lead with weather-protected connection system and cable. M6 ringlets. 20” long. Industry standard two-pin SAE connector. 15A fuse. USB CABLE 01-2943 Charge your device with this weatherproof charger. Low-input (less than 12.3V) auto-off protects vehicle battery from total discharge. 12V power through an industry standard SAE two-pin connector and a 40” supply cable. 5V 3300mA true output via a 40” USB output cable. USB port is weatherproof -seals against inserted USB cable for charging in any weather! Short-circuit, overheat and over-voltage protection. Apple 1A charge confirmation “handshake” built-in. Must be used with 01-2900 battery lead. NE W

NE W

12-571443 GHOST WHITE Oversized 1-1/8” clamping area. 2” rise. 7° upward bend. 14° pull back. 10° forward bend / 37° downward bend J-hooks. 30” width. Better positioning than stock bars and way stronger! Vertical and horizontal positioning graphics for perfect centering and pull back angulation. Designed as an all-around boondocking, hill climbing, jump, and tandeming bar with 38° angulation on the end of the bars to keep your hands from slipping off. MUNSTER BAR 12-571457 Oversized 1-1/8” clamping area. 1” rise. 5° up sweep. 14° pull back. 10° forward bend at the J-hooks. 29” width. Better posi tioning than stock bars and way stronger! Vertical and horizontal positioning graphics for perfect centering and pull back angulation.

12-571442

CONTROL

TRACTION

LUGGAGE ACCESSORIES

MEASUREMENTS IN MM SEE PAGE 257 DESCRIPTION PART # A B C D E KTM SX A08-110500 808 95 70 190 38 MINI A08-110501 732 100 85 185 63 CR LOW A08-110502 800 71 50 200 65 CR HIGH A08-110503 790 101 71 195 73 YZ LOW A08-110504 810 65 53 210 50 YZ HIGH A08-110505 803 92 56 210 57 KX LOW A08-110506 800 77 53 195 52 KX HIGH A08-110507 807 110 85 205 67 RM LOW A08-110508 798 74 53 200 58 RM HIGH A08-110509 802 99 65 200 54 ATV LOW A08-110511 770 130 115 180 92 ATV HIGH A08-110512 770 160 140 200 90

KESTERKE BAR 12-571451

Charge while you ride!

LUGGAGE

ACCESSORIES

TOOLS / TRAILER

LUBRICANTS

Oversized 1-1/8” clamping area. Small Diameter Grip. 1” Rise. 7° upward bend. 12° pull back. 40° downward bend j-hooks. 29” width.

29ER BAR 12-571452

TOOLS / TRAILER LUBRICANTS

HEATER KIT MAKE/MODEL

PART #

ATV / UTV

Universal 12-907113 Polaris AXYS/Matryx 12-907114 Ski-Doo Gen 4 12-907115

7/8” diameter at the clamp (works on most stock risers). Small Diameter Grip. 1” rise. 7° upward bend. 12° pull back. 40° downward bend j-hooks. 29” width.

MOTO

ATV / UTV MOTO

*Some conditions apply. Prices andmisprints are subject to change. Due to supply and price volatility fromour suppliers, prices are not shown for some items. See our website or call for assistance.

256

257

GIVE THE GIFT OF CHOICE!

FOLLOW US!

RETAIL STORES: GUELPH (519) 822-7081 INNISFIL (705) 431-9364 SUDBURY (705) 566-8111 WHITBY (905) 619-8000 KANATA (613)663-3167

GIFT CARD$