Winter 2023 Catalogue

MAIL ORDER: 1-800-265-2970 M-F 8AM-6PM EST EN/FR

SHOP ONLINE 24/7: WWW.ROYALDISTRIBUTING.COM

HELMETS Additional mounting locations provide increased versatility. Set consists of four, eight, or sixteen 30” glide tracks and hardware. EYEWEAR LOWPRO™ GLIDES Reduced friction and wear from carbides to make loading and unloading easier, and more efficient. Adds elements of safety and ease of use while loading and unloading your powersports vehicles. Low-profile design allows trailers to be used for multiple purposes. SNOW APPAREL

TRAILER SALT SHIELD 12-201016 Protects the resale value of your Snowmobile, ATVs and motorcycles by deflecting corrosive salt & road spray. 25.5” high and fits trailers from 95” to 102” wide without modification. Removes in seconds with included Quick-Detach kit. Will not shatter, crack, split or dent and is impervious to destructive road spray and foreign chemicals or fluids.

DESCRIPTION

PART # 12-13370 12-13371 12-13372 12-13373 12-13374 12-13375 12-13377

Narrow 6” - Extension Set - 4pc Narrow 6” - Single Set - 8pc Narrow 6” - Double Set - 16pc Standard 9” - Extension Set - 4pc Standard 9” - Single Set - 8pc Standard 9” - Double Set - 16pc

MX APPAREL

PROTECTIVE Wide 12” - Single Set - 8pc Wide 12” - Double Set - 16pc 12-13378 Hardware - Screw/Red Collars 8 pack 12-200976

GEAR

DESCRIPTION

PART # 12-13372-01

CASUAL Narrow 6” - Glide Kit With Mat 16pc w/ four 30” x 15” traction mats - This will fully outfit a 2 place 8’ or 10’ trailer Narrow 6” - Glide Kit With Mat 8pc w/ two 30” x 15” traction mats - This will fully outfit a 1 place 8’ or 10’ trailer

WEAR

TRAX SAVER 12-202475

12-13372-02

CAMERAS COMMUNICATORS

Saves track paddles from damage during transport, by raising them off deck surface. Easily tucks underneath paddles, once snowmobile is loaded.Designed to work with Caliber Trax

MULTI-GLIDES™ - WIDE Deep-channel design suspends all types of carbide runners, reducing friction. Multi-Glides Wide are designed to accommodate all dual runner skis. Eliminates damage to trailer decking caused by carbide ski wear rods. Multi-Glides Wide accommodate Snowmobiles with up to 11” of ski stance variance. Extension kits are available to complete 12 foot trailers, ramps, etc. (4-30” pieces per kit). Guaranteed not to break, crack, chip or wear out. Ideal for open place trailers and all ramps. Each 5 foot section sold separately requires one screw pack (12-200975).

Grabber. Made from a highly durable, proprietary rubber blend. Long lasting, no Hardware necessary.

ELECTRICAL CLUTCH/DRIVE

TRACKS SUSPENSION

See page xxx for more trailer mat options and stainless mounting hardware. PART # Wide Double Set - 40’ total (8 - 5’ pcs) 12-200986 Wide Single Set - 20’ total (4 - 5’ pcs) 12-200984 Wide - Single 5’ Section 12-200972 Rubber Trailer Mat 16”x 72” (½”Thick) 12-34407-03 Extension Kit - (4) 30” pieces 12-200988 Hardware - Screw/Grey Collars 8 pack 12-200975 DESCRIPTION

STAINLESS STEEL FASTENERS INCLUDED WITH ALL SETS.

WIDE - 8” WIDTH FITS ALL SKIS - INCLUDING NEW DOUBLE RUNNER SKIS

BRAKES

CABLES

TRAX GRABBER EFFORTLESS LOADING OF YOUR SNOWMOBILES 12-200999 Innovative lug pattern provides smooth interlocking. Strategic lug placement engages 2.5”, 2.86“ & 3.0” pitch tracks. Great for all tracks. 16”w accommodates all track widths without overhang. Great Low Profile design. High-impact plastic (TPO), guaranteed not to crack, chip, break or wear out. Stainless steel screws; installs with ease and won’t rust. NEW NEW NEW NEW

INTAKE/FUEL TRACTION LADDER HD 12-13566 WINDSHIELDS

NEW NEW

NEW

NEW

SLOTTED MOUNT SYSTEM DESIGNED TO ALLOW THE LOWPRO GLIDES TO EXPAND WITHOUT WARPING.

TRACTION LADDER 12-13550 Designed to assist with ground traction prior to ramp loading.

Extended traction for loading on icy surfaces. RampGrips protect rungs for use with studded tracks. Collapses for easy storage in the bed or cab of your truck. Over-sized hooks for use most sled deck or loading ramps. Tapered rubber feet for traction on most surfaces. Open: 15”Wx64”H. Closed: 3.3”W x75”Lx4”H. Capacity 500lbs. For snowmobile use only.

SKIS STEERING

PERFORMANCE

ENGINE PARTS

TRACTION

CONTROL

FLEX-GLIDES™ A MUST HAVE WITH YOUR V-FRONT TRAILER!

LOWPRO GRIPGLIDES 2.0 ™ Updated design provides an increased working surface. Additional mounting locations provide increased versatility. Feature innovative grip design providing superior traction for all wheeled vehicles & Snowmobiles. Low profile design makes loading & unloading quick and easy while allowing your trailer to be used for multiple purposes (hauling ATVs, furniture, etc.) without causing interference. Set consists of eight or sixteen 30" glide tracks, stainless steel attaching hardware and mounting instructions.

LUGGAGE ACCESSORIES

Assists in guiding the Snowmobile off your trailer and onto the ramp of a V-Front trailer. Low and High can be combined to complete enclosed V-Front trailers. Protect your trailer as well as your snowmobiles skis from unnecessary damage. High quality HDPE plastic. Sold in sets of 8 with stainless steel fasteners.

TOOLS / TRAILER

LUBRICANTS

LOW PROFILE

HINGED FOR EASY INSTALLATION

DESCRIPTION

PART # 12-13383

Standard 9” single set - 8pc Standard 9” double set - 16pc 12-13384 Standard 9” - Extension Set - 4pc 12-13382 Wide 12” - Single Set - 8pc 12-13386 Wide 12” - Double Set - 16pc 12-13387

ATV / UTV

MOTO

DESCRIPTION PART # Low Profile (8 pcs) 12-200993 High Profile (8 pcs) 12-200994

INTER LOCKING CAPABILITY

HIGH PROFILE

*Some conditions apply. Prices andmisprints are subject to change. Due to supply and price volatility fromour suppliers, prices are not shown for some items. See our website or call for assistance.

322

GIVE THE GIFT OF CHOICE!

FOLLOW US!

GIFT CARD$