Winter 2023 Catalogue

MAIL ORDER: 1-800-265-2970 M-F 8AM-6PM EST EN/FR

SHOP ONLINE 24/7: WWW.ROYALDISTRIBUTING.COM

MX APPAREL MAG BUDDY MAGNETO BEARING LUBRICATION SYSTEM 09-597200 Fits All 600 SDI/E-tec, 800R and 800 E-tec engines. This system replaces the OEM crank seal/retainer plate to allow injection of Iso-flex grease with the clutch installed/in place. Once the PTO Buddy is on, no further clutch removal is required to inject grease. Low pressure release valve to prevent overfilling. Grease and injector included. HELMETS EYEWEAR PTO BUDDY PTO BEARING LUBRICATION SYSTEM 09-597100 SNOW APPAREL

SKI-DOO 600/900 ACE CLUTCH TOOLS 19-15288 Tools required to service both clutches on the Ski-Doo 600/900 Ace engines. Does not fit P-drive clutches.

PROTECTIVE Fits All 600/800 SDI and E-tec’s(not 800R). This system replaces the lower magneto bolt to allow injection of Iso-flex grease at will. Grease and injector included.

SKI-DOO GEN 4/LYNX P-DRIVE CLUTCH TOOLS Tools required to hold the P-drive during removal from the engine, as well as to compress the clutch to access the clutch weights and remove the primary spring c-clip for servicing. All made from heavy gauge steel to eliminate flexing during use. Grease injector tool is used for greasing the roller bearings on the P-Drive clutch. See previous page for clutch pullers.

GEAR

For Isoflex Grease see page 350.

CASUAL SKI-DOO TRA CLUTCH SPRING COMPRESSOR 03-448 Used to install and remove primary spring safely and easily in all TRA primary clutches spiders. Aligns all parts perfectly.

WEAR

C

CAMERAS COMMUNICATORS

A

ELECTRICAL CLUTCH/DRIVE SKI-DOO QRS SECONDARY CLUTCH TOOLS Required tool for changing helix/spring on Ski-Doo QRS driven clutch.

D

B

E

TRACKS SUSPENSION

PART # DESCRIPTION A 03-454 Primary Clutch Compressor B 03-455 Circlip Installer/Remover Tool C 03-28513 P-Drive Clutch Holder D 03-456 Roller/Arm Pivot Pin Remover Tool E 19-15286 Grease Injector

03-453

03-452

DESCRIPTION PART # ‘08-09 Models 03-452 ‘10-18 Models 03-453

BRAKES

CABLES

NEW NEW NEW NEW

NEW NEW

ATV / UTV YAMAHA APPLICATIONS 19-157262 Used on all YAMAHA YXRC clutches through ‘05. Quickly and easily remove weights and rollers without having to first remove the primary clutch cover. This will save time and unwanted wear and tear on the bushing. TOOLS / TRAILER POLARIS BUTTON REMOVAL TOOL 03-279086 All Polaris models. Removes Polaris primary clutch buttons quickly without damage. CLUTCH COMPRESSION TOOL ATV FITMENT: Yamaha, Arctic Cat and Suzuki Secondary Clutches. Polaris, Kawasaki and Comet Primary Clutches. Kawasaki 360 and 650 Prairie Secondary Clutches TRACTION Allows 1 person to compress clutches for service work, remove and install helixes, change springs and do maintenance. Works on many Snowmobile/ATV clutches. SNOWMOBILE FITMENT: Polaris, Arctic Cat, Yamaha, and Comet Primary Clutches, Ski-Doo RER Secondary Clutches. ENGINE PARTS CLUTCH COMPRESSION TOOL SNOWMOBILE/ATV 03-444 INTAKE/FUEL SKI-DOO QRS GEAR RETAINER TOOL 03-228 Fits ‘08-15 Ski-Doo’s with QRS secondary clutch. On these models, you must remove the jackshaft to change the helixes or replace the rollers. This tool holds the top sprocket and chain in place, eliminating the need to remove the chaincase cover.

NEW

SECONDARY CLUTCH TOOL 03-442 A must have for use on the Polaris, Ski-Doo and the Arctic Cat/Polaris-style driven clutches. Changing spring ten sion, springs, or helix is a simple task. Easily fits into the storage area of the snowmobile for easy clutch tuning in the field. Will NOT work with Ski-Doo RER. NEW

WINDSHIELDS

SKIS STEERING

PERFORMANCE

CLUTCH COMPRESSOR TOOL POLARIS APPLICATIONS 03-12046 For all models - including ‘94 and up with side panels. Includes 1 compression lever, 1 locking retainer and 1 sheave clamp.

CONTROL

LUGGAGE ACCESSORIES

POLARIS CLUTCH PRESS TOOL 19-082060 Widely accepted as the most efficient clutch compression tool available. This revolutionary drive and driven clutch servicing tool is designed specif ically for compressing and holding springs for ease of assembly

LUBRICANTS

and disassembly. These tools are specified in many factory repair manuals as a required specialty tool for clutch compression. High quality metal

construction with powder coated finish and UHMW plastic wear patches and fingers.

MOTO

*Some conditions apply. Prices andmisprints are subject to change. Due to supply and price volatility fromour suppliers, prices are not shown for some items. See our website or call for assistance.

162

GIVE THE GIFT OF CHOICE!

FOLLOW US!

GIFT CARD$

Made with FlippingBook - Online catalogs