Royal-Distributing-2022-Winter

MAIL ORDER: 1-800-265-2970 M-F 8AM-6PM EST EN/FR

SHOP ONLINE 24/7: WWW.ROYALDISTRIBUTING.COM

GREAT ADD-ON FOR HARDPACKED TRAILS!

SNOW APPAREL SLIDE SAVERS FITS ALL MAKES & MODELS 12-17205

Skidframe mounted Slide Savers are a great add-on for those hard packed trails. Easily mounted to rear suspension, they can be tucked out of the way when in good snow conditions. Sold in pairs. Includes mounting kit. 14-1/2” long. Must be disengaged when reversing!

EYEWEAR

HELMETS

PART # REPLACEMENT SPRING 12-17205L Left Hand Spring 12-17205R Right Hand Spring

MX APPAREL

TORQUE ALL MAXX SCRATCHERS TO 15 FT/LBS ONLY.

PROTECTIVE DELUXE ICE SCRATCHERS Long lasting stainless wire rope. Use in the down position at all times; or hook them in the Ice Scratcher retaining blocks (12-186106). Replaceable carbide tips (12-186102). Available in 12” & 16” length kits: 16” for tracks with lug height over 2.8”or A-arm mounting.

2X2C ICE SCRATCHER

GEAR

12” for tracks with lug height under 2.8” A-Arm mounts sold separately, see below. 2X2C DUAL HEAD ICE SCRATCHERS

DELUXE ICE SCRATCHER

CASUAL

Increase cooling/lubrication with MAXX Dual Head Carbide Scratchers. Full kits available in 12” & 16” lengths or purchase the Dual Head and replace the single head on your existing Ice Scratchers. Fits on MAXX, Arctic, and Straightline Performance TM kits. Sold in pairs. DOUBLE THE SNOW DUST FOR INCREASED COOLING AND LUBRICATION!

WEAR

ICE SCRATCHER RETAINING BLOCKS 12-186106 SOLD EACH Aluminum blocks. Includes all mounting hardware. Allows for more areas in the rail to install scratchers. Keeps Scratchers in up position when not in use. Compatible with all single head flexible scratchers.

CAMERAS & COMMUNICATORS

DESCRIPTION (PR) 12” Ice Scratcher 16” Ice Scratcher 12” 2X2C Ice Scratcher 16” 2X2C Ice Scratcher ACCESSORIES (PR)

PART # 12-186100 12-186101 12-186103 12-186104

REPLACEMENT DUAL HEAD

ELECTRICAL CLUTCH/DRIVE

*Includes carbide tips

PART # Replacement HD Carbide Tip 12-186102 Replacement 2X2C Head Kit* 12-186105

TRACKS SUSPENSION ICE SCRATCHERS ALPHA ONE 12-186107

Skidframe mounted scratchers for the Alpha One suspension. Increased lubrication of sliders. Fits ’22 Blast 4000, ’19-22 M6000/8000 Alpha One & ’21-22 Riot X 8000. Sold in pairs. Must be disengaged when reversing!

NEW NEW

NEW

BRAKES

CABLES

NEW

NEW

WINDSHIELDS

INTAKE/FUEL

PERFORMANCE ICE SCRATCHER Uses custom carbide studs built by Woody’s. Full stainless wire rope and ends for lifetime use. Designed to be run down at all times, but can be mounted on the rails if needed. Replaceable carbide scratcher tips available. Large mounting base to avoid rail wear.

C

SKIS STEERING

D

16” for tracks with lug height over 2.8”or A-arm mounting. 12” for tracks with lug height under 2.8”. Sold in pairs.

ENGINE PARTS 12” Ice Scratchers 16” Ice Scratchers DESCRIPTION

PART # 12-185101

PERFORMANCE

12-185102 A- Replacement Standard Tip 12-185103 C- A-Arm Mount Kit -Sold Each 12-185106 D- Rail Saver Mounts 12-185107

A

NO MORE BREAKING YOUR SCRATCHERS!

LUGGAGE ACCESSORIES Made from an aggregate polymer RMDS material that is both incredibly strong and extremely flexible allowing you to go forward or in reverse. Replaceable carbide tips for unmatched slider lube and engine cooling. Universal, quick and easy installation on virtually any snowmobile. Mounts to either bottom of running board or front swaybar mount. TRACTION FLEXIBLE ICE SCRATCHERS KIT 12-17202 FITS ALL MAKES & MODELS CONTROL

TOOLS / TRAILER REPLACEMENT TIPS 14-ATP-7100 SOLD IN PAIRS LUBRICANTS

SHOWN ON SWAYBAR

SKI-Z ICE SCRATCHERS 12-230326 SOLD IN PAIRS

ATV / UTV / The Ski-Z’s attach to the rear of any ski in minutes for excellent cooling performance on hard packed snow. They keep your sliders lubricated and cool your engine by deflecting the snow that is disturbed by the runners as they pass over the snow surface. Ski-Z’s operate on a movable pivot to virtually eliminate any tendency to increase steering effort or affect direction control . Also, when used in reverse, the same pivot allows the Ski-Z to rotate 360 degrees to avoid breakage. Made from high-carbon spring steel for ultra-durability and performance. Large-lobed lock-nut knobs allow for easy install and the neoprene tension washer insures that the SKI-Z’s “stay put”. Installed as a pair, SKI-Z’s are left/right sensitive and include easy to follow illustrated instruc- tions. Simply drill a 5/16 inch hole in each ski and install. REPLICAS

MOTO

BICYCLE

*Some conditions may apply. Prices andmisprints subject to change. COVID-19 has caused supply issues and price fluctuations fromour suppliers. As a result prices are not shown for some items. See our website or call for assistance.

186

FOLLOW US!

GIVE THE GIFT OF CHOICE!

GIFT CARD$