2025/26 Digital Winter Parts Catalogue

FREE SHIPPING ON ORDERS OVER $89 *

SUBSCRIBE TO OUR EMAILS FOR THE LATEST PRODUCTS AND DEALS!

PTO BUDDY PTO BEARING LUBRICATION SYSTEM 09-597100 Fits All 600 SDI/E-tec, 800R and 800 E-tec engines. This system replaces the OEM crank seal/retainer plate to allow injection of Iso-flex grease with the clutch installed/in place. Once the PTO Buddy is on, no further clutch removal is required to inject grease. Low pressure release valve to prevent overfilling. Grease and injector included.

SKI-DOO 600/900 ACE CLUTCH TOOLS 19-15288 Tools required to service both clutches on the Ski-Doo 600/900 ACE engines. Does not fit P-drive clutches.

ELECTRICAL

CLUTCH/DRIVE

SKI-DOO/LYNX P-DRIVE CLUTCH TOOLS Tools required to hold the P-drive during removal from the engine, as well as to compress the clutch to access the clutch weights and remove the primary spring c-clip for servicing. All made from heavy gauge steel to eliminate flexing during use. Grease injector tool is used for greasing the roller bearings on the P-Drive clutch -screws on the end of a grease gun tip (will not screw on an Isoflex grease tube). See previous page for clutch pullers.

MAG BUDDY MAGNETO BEARING LUBRICATION SYSTEM 09-597200 Fits All 600/800 SDI and E-tec’s(not 800R). This system replaces the lower magneto bolt to allow injection of Iso-flex grease at will. Grease and injector included.

TRACKS

SUSPENSION

C

A

D

CABLES

BRAKES

PART # DESCRIPTION A 03-454 Primary Clutch Compressor B 03-455 Circlip Installer/Remover Tool C 03-28513 P-Drive Clutch Holder D 03-456 Roller/Arm Pivot Pin Remover Tool E 19-15286 Grease Injector F 1037-0357 Roller Lube Kit (syringe, adaptor & 10g of Isoflex grease) - requires 19-15286

For Isoflex Grease see page 258

E

SKI-DOO TRA CLUTCH SPRING COMPRESSOR 03-448 Used to install and remove primary spring safely and easily in all TRA primary clutches spiders. Aligns all parts perfectly.

B

NE W

F

INTAKE/FUEL

WINDSHIELDS

POLARIS BUTTON REMOVAL TOOL 03-279086 All Polaris models. Removes Polaris primary clutch buttons quickly without damage. A must have for use on the Polaris, Ski-Doo and the Arctic Cat/Polaris-style driven clutches. Changing spring ten sion, springs, or helix is a simple task. Easily fits into the storage area of the snowmobile for easy clutch tuning in the field. Will NOT work with Ski-Doo RER. SECONDARY CLUTCH TOOL 03-442

SKI-DOO QRS SECONDARY CLUTCH TOOLS Required tool for changing helix/spring on Ski-Doo QRS driven clutch.

SKIS

STEERING

03-453

DESCRIPTION PART # ‘08-09 Models 03-452 ‘10-17 Models 03-453

03-452

ENGINE PARTS

PERFORMANCE

SKI-DOO QRS GEAR RETAINER TOOL 03-228 Fits ‘08-15 Ski-Doo’s with QRS secondary clutch. On these models, you must remove the jackshaft to change the helixes or replace the rollers. This tool holds the top sprocket and chain in place, eliminating the need to remove the chaincase cover.

NE W

POLARIS P-22 CLUTCH COMPRESSION TOOL 1016-7360 Allows you to compress the spring without removing the clutch from the engine. Remove the drive clutch bolt, thread this tool into the center of the clutch and compress the spring. This allows you to safely remove the clutch cover cap bolts without damaging the bushing to change the drive clutch spring or weights.

NE W

CONTROL

TRACTION

SKI-DOO QRS CLUTCH COMPRESSION TOOL Remove helix or change secondary rollers all without removing the jackshaft or touching the chaincase. PART # ‘08-23 models w/QRS clutches ex. below AC19000001 All 900 Turbo w/QRS clutches 1005-5519 DESCRIPTION

CLUTCH COMPRESSOR TOOL POLARIS APPLICATIONS 03-12046 For all models - including ‘94 and up with side panels. Includes 1 compression lever, 1 locking retainer and 1 sheave clamp.

LUGGAGE

ACCESSORIES

CLUTCH COMPRESSION TOOL YAMAHA APPLICATIONS 19-157262 Used on all YAMAHA YXRC clutches through ‘05. Quickly and easily remove weights and rollers without having to first remove the primary clutch cover. This will save time and unwanted wear and tear on the bushing. ATV FITMENT: Yamaha, Arctic Cat and Suzuki Secondary Clutches. Polaris, Kawasaki and Comet Primary Clutches. Kawasaki 360 and 650 Prairie Secondary Clutches CLUTCH COMPRESSION TOOL SNOWMOBILE/ATV 03-444 Allows 1 person to compress clutches for service work, remove and install helixes, change springs and do maintenance. Works on many Snowmobile/ATV clutches. SNOWMOBILE FITMENT: Polaris, Arctic Cat, Yamaha, and Comet Primary Clutches, Ski-Doo RER Secondary Clutches.

ARCTIC CAT/POLARIS CLUTCH PRESS TOOL 19-082060

INDEX TOOLS / TRAILER LUBRICANTS

This tool is designed specifically for compressing and holding drive and driven clutches for the safe and easy of assembly and disassembly of the clutch. The tool can be used for field testing or production clutch repair on the shop bench. High quality metal construction. Fits all Arctic Cat primary, ‘12-16 secondary (except Diamond and Team) All Polaris drive & driven including ATV, RZR, Ranger, P2, and Team clutches.

39

RETAIL STORES: GUELPH (519) 822-7081 INNISFIL (705) 431-9364 SUDBURY (705) 566-8111 WHITBY (905) 619-8000 KANATA (613)663-3167