2025/26 Digital Winter Parts Catalogue

FREE SHIPPING ON ORDERS OVER $89 *

SUBSCRIBE TO OUR EMAILS FOR THE LATEST PRODUCTS AND DEALS!

STAINLESS STEEL® 60° SIGNATURE SERIES High corrosion resistance. Durable, sharp 60° carbide tip. 5/16” shank with 15/16” head. Includes locknuts.

MEGABITE® 60° Unique multi-directional stud has four flat sur faces on shank. Provides enhanced acceleration and deceleration. Coated through hardened stud with 60° carbide tip.

CHISEL-TOOTH Great grass and ice drag racing stud. Flat vertical face traps ice and dirt. 5/16” steel shank and a 1” head. Includes locknuts. USED ON 2-PLY TRACKS ONLY. *1.325” and taller studs includes aluminum BIG NUTS!

15/16” head. Includes locknuts. USED ON 2-PLY TRACKS ONLY. *1.325”and taller studs now come with aluminum BIG NUTS! SIZE THREAD PART # 1.075” 5/16” 14-MEG-1075 1.175” 5/16” 14-MEG-1175 1.325” 5/16” 14-MEG-1325* 1.450” 5/16” 14-MEG-1450* 1.575” 5/16” 14-MEG-1575* 1.740” 5/16” 14-MEG-1740*

ELECTRICAL

USED ON 2-PLY TRACKS ONLY. *1.325”and 1.450” studs now come with aluminum BIG NUTS! SIZE THREAD PART # 1.000” 5/16” 14-SSP-1005 1.075” 5/16” 14-SSP-1075 1.175” 5/16” 14-SSP-1175 1.325” 5/16” 14-SSP-1325* 1.450” 5/16” 14-SSP-1450*

CLUTCH/DRIVE

SIZE THREAD PART # 1.000” 7mm 14-CAP-1000 1.075” 5/16” 14-CAP-1075 1.205” 5/16” 14-CAP-1205 1.325” 5/16” 14-CAP-1325* 1.630” 5/16” 14-CAP-1630* 1.860” 5/16” 14-CAP-1860*

TRACKS

SUSPENSION

GOLD DIGGER® 60° Features an aggressive 60° point for maximum penetration. Heavy duty 5/16” through-hardened, threaded shank and 1” support head. Designed for violent accelera tion on hard, icy conditions. Includes Locknuts. USED ON 2-PLY TRACKS ONLY. *1.325”and taller studs

GRAND MASTER® FOR SINGLE PLY TRACKS 60° carbide tip with a larger 1.200 head to pro vide a larger anchor to distribute pressure over a wider area on the single ply track. 2.52 pitch tracks MUST use the SQUARE support plates. USED ON SINGLE-PLY TRACKS ONLY. *1.325”and up studs now come with aluminum BIG NUTS!

GRAND/TRIGGER STUDS THE lake ice stud – built to effortlessly penetrate icy terrain and provide ultimate traction with shortened threads and a lengthy, narrow, tapered profile. Through-hard ened carbon steel with 60° carbide insert. Trigger studs have 15/16” head for use in two-ply tracks., Grand Trigger studs have 1.2” head for single-ply tracks. Both have anti-rotation lines. *All Trigger studs come with short BIG NUTS.

CABLES

BRAKES

now come with aluminum BIG NUTS! # Silver in colour.

SIZE THREAD PART # 0.875” 5/16” 14-GDP6-8755 0.920” 5/16” 14-GDP6-9205 # 1.000” 5/16” 14-GDP6-1005 1.075” 5/16” 14-GDP6-1075 1.175” 5/16” 14-GDP6-1175 1.325” 5/16” 14-GDP6-1325* 1.450” 5/16” 14-GDP6-1450* 1.575” 5/16” 14-GDP6-1575*

INTAKE/FUEL

WINDSHIELDS

SIZE THREAD TRIGGER PART #

GRAND TRIGGER PART #

SIZE THREAD PART # 1.075” 5/16” 14-GMP-1075 1.325” 5/16” 14-GMP-1325* 1.450” 5/16” 14-GMP-1450* 1.575” 5/16” 14-GMP-1575*

1.325" 5/16" 1.450" 5/16" 1.575" 5/16" 1.630" 5/16" 1.860" 5/16"

14-TRIG1325* 14-GTRG-1325* 14-TRIG1450* 14-GTRG-1450* 14-TRIG1575* 14-GTRG-1575*

14-TRIG1630* 14-TRIG1860*

SKIS

STEERING

NOTE: Tunnel and/or Heat Exchanger Protection is required with all traction products. It is your responsibility to ensure proper clearances and adequate protection.

ROYAL BREAKS DOWN ALL STUDS AND WASHERS. NO NEED TO BUY KITS. WE ONLY SELL YOU WHAT YOU NEED.

SNOCROSS 60° 1.860” 1.860” with 60° carbide tip. 5/16” push through style. Meets ISR requirements.

ANGLED DIGGER PLATES Woody’s 5/16” aluminum, 7° angled support plates hold the stud off perpendicular from the track. Under load the stud moves to perpendicular enhancing the consistency of acceleration. USED ON 2-PLY TRACKS ONLY.

ROUND SUPPORT PLATES 14-AWA-3775 Woody’s 5/16” round aluminum support plate with a 1-3/8” diameter. USED ON 2-PLY TRACKS ONLY. GRAND MASTER WASHERS Woody’s 5/16” Aluminum round or square. Designed for the Grand Master studs. For SINGLE PLY TRACKS. 1.500” head on square plates, 1.600” on round.

ENGINE PARTS

PERFORMANCE

Through-hardened, alloy steel. USED ON 2-PLY TRACKS ONLY. *Now includes larger tall nut.

7 ° angle

CONTROL

TRACTION

TYPE PART # Single 14-ANG-3775 Double 14-ADA2-3775

TYPE PART # Round 14-ARG-3775* Square 14-ASG-3775 *Only for 2.86” pitch tracks.

SIZE THREAD PART # 1.860” 5/16”

LUGGAGE

ACCESSORIES

14-RACE-1860 for 1.75” tracks

GRAND DIGGERS 14-ADG-3775

DOUBLE DIGGERS 14-ADD-3775

SQUARE BACKERS 14-ASW2-3775 5/16” square aluminum support plate with a 1.2” diameter. USED ON 2-PLY TRACKS ONLY.

ALUMINUM BIG NUT 5/16” - 24 threads. Nyloc.

Used with the Grand Master stud in SINGLE PLY TRACKS. This addition of a dual configuration gives you more studding options in the middle belt.

Less weight than steel or 2 single aluminum plates. Dome area increased to take advantage of the patented dished head design Traction Master series studs. 5/16” holes. For 2-Ply tracks.

INDEX TOOLS / TRAILER LUBRICANTS

SIZE PART # 1.575” Studs & Longer 14-ALN-7000 1.325-1.450” Studs 14-ALN-4500

183

RETAIL STORES: GUELPH (519) 822-7081 INNISFIL (705) 431-9364 SUDBURY (705) 566-8111 WHITBY (905) 619-8000 KANATA (613)663-3167

Made with FlippingBook - professional solution for displaying marketing and sales documents online