2020 Fall/Winter Catalogue

C A N A D A ’ S P O W E R S P O R T S L E A D E R !

V-FRONT RAMP SHIELD 12-202303 $769 Universal design fits most open trailers 30” tall. Aerodynamic design to help with gas mileage. Molded

TRAILER SALT SHIELD 12-201016 $419 Protects the resale value of your Snowmobile, ATVs and motorcycles by deflecting corrosive salt & road spray. 25.5” high

SNOW APPAREL

Grips down the center to give your snowmobile track traction. Protective gate to keep your ski away from the bumper of your tow vehicle. Lightweight HDPE guaranteed not to crack, chip, break or wear out.

and fits trailers from 95” to 102” wide without modification. Removes in seconds with included Quick-Detach kit. Will not shatter, crack, split or dent and is impervious to destructive road spray and foreign chemicals or fluids.

EYEWEAR

HELMETS

MX APPAREL

SKIS STEERING WINDSHIELDS TRACKS SUSPENSION INTAKE FUEL BRAKES CABLES CLUTCH DRIVE ELECTRICAL CASUAL WEAR CAMERAS & COMMUNICATORS

T MULTI-GLIDES™ - WIDE

TRAX SAVER 12-202475 $41.99

Deep-channel design suspends all types of carbide runners, reducing friction. Multi-Glides Wide are designed to accommodate all dual runner skis. Eliminates damage to trailer decking caused by carbide ski wear rods. Multi-Glides Wide accommodate Snowmobiles with up to 11” of ski stance variance. Extension kits are available to complete 12 foot trailers, ramps, etc. (4-30” pieces per kit). Guaranteed not to break, crack, chip or wear out. Ideal for open place trailers and all ramps. Each 5 foot section sold separately requires one screw pack (12-200975). STAINLESS STEEL FASTENERS INCLUDED WITH ALL SETS. DESCRIPTION PART # PRICE Wide Double Set - 40’ total (8 - 5’ pcs) 12-200986 223.99 Wide Single Set - 20’ total (4 - 5’ pcs) 12-200984 124.99 Wide - Single 5’ Section 12-200972 29.99 Rubber Trailer Mat 16”x 72” (½”Thick) 12-34407-03 34.99 Extension Kit - (4) 30” pieces 12-200988 74.99 Hardware/Screw pack 12-200975 1.99 LOWPRO WIDE GLIDES KITS Low profile design allows your Snowmobile to glide on and off trailer without causing interference while using the trailer for other purposes. • Eliminates damage to trailer decking caused by carbide wear rods. • 6.5" wide with a 45° angled edge to reduce interference. • Accommodates all dual runner skis and ski stance variances up to 12.5". • HDPE guaranteed not to crack, chip, break or wear out. 12-34407 $219.88 KIT Kit Includes: 1. Eight 5 foot sections of Guide and Slide track. *LIMITED QUANTITIES AVAILABLE* See page 299 for more trailer mat options and stainless mounting hardware.

Saves track paddles from damage during transport, by raising them off deck surface. Easily tucks underneath paddles, once snowmobile is loaded.Designed to work with Caliber Trax

Grabber. Made from a highly durable, proprietary rubber blend. Long lasting, no Hardware necessary.

WIDE - 8” WIDTH FITS ALL SKIS - INCLUDING NEW DOUBLE RUNNER SKIS

SLOTTED MOUNT SYSTEM DESIGNED TO ALLOW THE LOWPRO GLIDES TO EXPAND WITHOUT WARPING.

TRAX GRABBER EFFORTLESS LOADING OF YOUR SNOWMOBILES 12-200999 $41.99 Innovative lug pattern provides smooth interlocking. Strategic lug placement engages 2.5”, 2.86“ & 3.0” pitch tracks. Great for all tracks. 16”w accommodates all track widths without overhang. Great Low Profile design. High-impact plastic (TPO), guaranteed not to crack, chip, break or wear out. Stainless steel screws; installs with ease and won’t rust.

TRACTION ENGINE PARTS 2. Two 30” x 15” traction mats. (Place in line to for 60” x 15”) THIS KIT WILL OUTFIT A SINGLE PLACE 8’ or 10’ TRAILER. LOWPRO NARROW GLIDE KIT 12-13372 $179.99 KIT Kit Includes: 16x 30” L x 6” W (40 feet total) sections of Guide and Slide track. FLEX-GLIDES™ A MUST HAVE WITH YOUR V-FRONT TRAILER! 2. Four 30” x 15” traction mats. (Place in line to for 60” x 15”) THIS KIT WILL FULLY OUTFIT A 2 PLACE 8’ or 10’ TRAILER. 12-34412 $119.88 KIT Kit Includes: 1. Four 5 foot sections of Guide and Slide track. *LIMITED QUANTITIES AVAILABLE*

traction mats

INDIVIDUAL PIECES PART # DESCRIPTION 12-34407-03 (1) Traction Mat 72” x 16”

PRICE 34.99 18.99

PERFORMANCE

12-34418 12-34419

(1) Traction Mat 30” x 30” (1) Traction Mat 15” x 30”

9.99 54.88

12-34407-06 (2) 5’ Trailer Slides 12-34407-08 (4) 5’ Trailer Slides 99.88 12-13372 (set) (16) Trailer Slides 40’ total 6”w 179.99

CONTROL

LOWPRO GRIPGLIDES 2.0 ™ Updated design provides an increased working surface. Additional mounting locations provide increased versatility. Feature innovative grip design providing superior traction for all wheeled vehicles & Snowmobiles. Low profile design makes loading & unloading quick and easy while allowing your trailer to be used for multiple purposes (hauling ATVs, furniture, etc.) without causing interference. Set consists of eight or sixteen 30" x 9" glide tracks, stainless steel attaching hardware and mounting instructions.

LUGGAGE ACCESSORIES

Assists in guiding the Snowmobile off your trailer and onto the ramp of a V-Front trailer. Low and High can be combined to complete enclosed V-Front trailers. Protect your trailer as well as your snowmobiles skis from unnecessary damage. High quality HDPE plastic. Sold in sets of 8 with stainless steel fasteners. LOW PROFILE

ATV/MOTO TOOLS/TRAILER LUBRICANTS

HINGED FOR EASY INSTALLATION

*While Supplies Last

DESCRIPTION PART # PRICE Grip Glide 20’ set 12-202301 * 129.88 Grip Glide 40’ set 12-202302 * 239.88 Grip Glide 2.0 20’ set 12-13383 139.99 Grip Glide 2.0 40’ set 12-13384 264.99

DESCRIPTION PART # PRICE Low Profile (8 pcs) 12-200993 54.99 High Profile (8 pcs) 12-200994 61.99

INTER- LOCKING CAPABILITY

HIGH PROFILE

298

*Some conditionsmayapply.Please see ourPoliciesandProcedures onpage 390 fordetails.Part#’s ingreenarenew this year.Pricesandmisprints subject to change.