2019 Spring/Summer Catalogue

FORK SKINS Help protect vulnerable fork tubes and seals from dust, dirt and corrosive elements. Designed to fit closely over upper and lower fork tubes. Includes durable cable ties for extra security. Two free donuts also included. PRICE M08-463211 44-50mm forks, 127mm length 26.99 M08-463227 44-50mm forks, 381mm length 35.99 M08-463226 32-43mm forks, 356mm length 35.99 PROTECT YOUR FORK TUBES! PART # DESCRIPTION

SEAL DOCTOR Removes the dirt that typically causes a leaky fork seal...And you can do it right at the track or on the trail! Just snap the Seal Doctor on your fork tube, insert it into the leaky seal and twist. The design maintains the proper position and angle as you rotate around your fork tube. It effortlessly pulls the dirt out of the fork rather than pushing it deeper into the fork.

CASUAL WEAR MX APPAREL MX HELMETS &

FORKS PART # PRICE 35-45MM M12-600123 36.99 45-55MM M12-600121 36.99

SEALMATE FORK SEAL CLEANER M12-055935 $11.99 Easy way to keep your fork seals clean and debris free. Extracts dirt and

MICRO FORK BLEEDERS For use on most inverted forks with a M5x0.8 air bleed screw in the fork cap. Low profile design is only 11mm high installed. Stainless steel body is stronger and will not corrode. Easy to install. Reduces harshness caused by air build-up. Allows bleeding of air pressure without tools. One of the easiest bolt-on upgrades you can make to your forks. Kit includes two bleeder valves.

PROTECTIVE GEAR

debris trapped between fork seal and tube. Will work on conventional and inverted forks.

MOTORCYCLE APPAREL

MODEL PART # PRICE SHOWA M12-110089 19.99 KYB M12-110095 19.99

FORK TOP BLEEDERS Allows bleeding of air pressure without additional tools. Easy to install. Fits most KAYABA and Showa forks. ( Excluding KX 250F ‘11- ,YZ 85 , RMZ 250/450 ‘13-up ) Sold in pairs. ∆ LIMITED STOCK

FITS MODEL PART # SHOWA/KYB INVERTED FORKS Blue M12-027846 Red M12-027845 Titanium ∆ M12-027844 WP INVERTED FORKS Orange All w/o external preload adjustment M12-027847 Blue ∆ ONLY $19.99 *$14.88 M12-027847-01 *

FORK SUPPORT FOR TRANSPORT M12-185001 $16.99 Designed to keep the motorcycle stable during transportation as well as prevent damage to fork seals and spring. The fork fits all 80cc and larger bikes with 11" or more travel.

CAMERAS &

COMMUNICATORS

MARINE

WATERSPORTS

ATV/UTV

ELECTRICAL

TREAD DOCTOR SNIPER KIT The ultimate tire cutting kit. Sharpen your knobby’s and groove your tires for custom tread patterns all with one tool. This kit includes a Tire Sniping cutting head, 12 replacement blades and specially designed heated carbide cutting blade. Refresh your front or rear tire. With a little practice you can cut the minimal amount of rubber off each time to get a new edge thus extending the life our your tires and giving you maximum traction for every ride. INCLUDES: Cutting tip, brass cutting head #3 & 12 replacement blades. Unit includes on/off switch and holding stand. 100W 110V 50/60Hz. CE and ROHS Certified.

ATV/UTV CLUTCH/

DRIVE/EXHAUST/SUSP.

TYPE PART # PRICE Sniper Kit 19-648837 108.99 Blade Kit 19-648838 34.99

ATV/UTV BRAKES/ CABLES/ENGINE

FRONT LIFT STRAP M12-840265 $17.99

REAR LIFT STRAP M12-840266 $28.99

ATV/UTV LUGGAGE & ACCESSORIES

Buckles and bushings are made from 6061 T-6 aluminum. Mounts to the front forks. Handy lift point for those nasty sit- uations. Perfect for loading a bike into the back of a pickup.

SINGLE BIKE CARRIER WITH RAMP M12-9190 $149.99 Black powder coated steel. Includes ramp (mounts on carrier for transportation). Up to 500 lbs capacity. Eliminates the need for a trailer. Fits 2” (50mm) receiver. nearly any bike that uses two bolts to attach the seat to the sub-frame (17” max length between the bolts). Also fits nearly all KTM models with the single under-fender seat bolt. Multiple sizes of mounting hardware included. Buckles and bushings are made from 6061 T-6 aluminum. 1” webbing is strong, thick and easy to grab. Adjustable length to accommodate taller seats. Fits

UTV

ACCESSORIES

LOCK-N-LOAD MOTO TRANSPORT SYSTEM 12-677849 $269 Securely holds your MX bike in your trailer without the use of tie-down straps, floor anchors or wheel chocks. It takes an enormous amount of pressure off of the fork seals during transit, and it frees up valuable space allowing the transport of more bikes or gear. Additionally, it can be

ATV/UTV

TIRES & WHEELS

quickly be removed by unscrewing the four T-bolts leaving only the low profile mounting plates. Each plate has a “D” ring for additional anchor points on your trailer floor. Additional plates available for mounting in a truck bed.

MOTOCROSS

PARTS/ACCESS.

MOTORCYCLE

PARTS/ACCESS.

TOOLS/TRAILER LUBRICANTS

PART # DESCRIPTION 12-677869 Extra Trailer Plates 12-677879 Truck Bed Adapter Plates

PRICE 34.88 39.88

BICYCLES,

PARTS/ACCESS.

291